DOWNLOAD BROCHURE…
DOWNLOAD BROCHURE…
…Composition (Wt%): Si Mn Cu Zn Al Ni Mg Other total 0.05 0.15 min. 0.05 0.40-1.5 5.8-7.2 0.005 BAL 0.3 Note: Single values are maximum unless otherwise noted. View/Download Data…
…Composition: Al Cr Cu Mn Si Be Fe Mg Ti Zn Bal 0.05-0.25 0.3 0.05 4.50-6.00 0.0003 0.8 0.05 0.2 0.1 Note: Single numbers are maximum unless otherwise noted. View/Download…
…and diameters in spool and wire rods. Chemical Composition (Wt%): Si Mn Cu Mo S Ni Cr P C 1.0 0.5-1.5 1.5-2.5 2.9-3.9 0.03 6.5-8.5 24.0-27.0 0.04 0.06 Note: Single…
…aluminum alloys when multiple weld passes are used and dilution of the base metal into the puddle is negligible. This alloy could also offer advantages in brazing type applications on…
…Strength: 110,000 psi min. Elongation: 15% min. Available in multiple sizes and diameters in spool and wire rods. Chemical Composition (Wt%): Si Mn Cu Mo S Ni Cr P C…
…Chemical Composition: SI Fe Mn Cu Zn Mg Al Other Impurity Other element 11-13 0,08 max 0.15 0.30 max 0.20 max 0.10 Bal 0.05 max 0.15 max View/Download Data Sheet…
…is developed as a brazing alloy and typically used as a filler metal for gas-tungsten-arc and gas-metal-arc welding of aluminum of similar composition, heat treatment, and corrosion resistance; although, usage…
…steels. This alloy contains higher amount of carbon that enables air-hardening, producing a martensitic microstructure. ER410 is good for welding overlays on carbon steels to produce a resistance to erosion,…
…excellent abrasion resistance, and moderate compressive strengths and impact resistance. Weldite D has surface checks, and no machineable or forgeable deposits. It is slightly magnetic on carbon steel. Contains: Carbon,…