…Chemical Composition (Wt%): Si Mn Cu Mo S Ni Cr P C 0.30-0.65 1.0-2.5 0.75 2.0-3.0 0.03 11.0-14.0 18.0-20.0 0.03 0.03 Note: Single values are maximum unless otherwise noted. View/Download…

…(Wt%): Si Mn Cu Mo S Ni Cr P C 0.30-0.65 1.0-2.5 0.75 2.0-3.0 0.03 11.0-14.0 18.0-20.0 0.03 0.04-0.08 Note: Single values are maximum unless otherwise noted. View/Download Data Sheet…

…Range High: 1370 F / 743 C Brazing Temperature Range Low: 1320 F / 716 C Liquidus: 1270 F / 688 C Solidus: 1170 F / 632 C View/Download Data…

…multiple sizes and forms. Welding Parameters: Spray transfer: .035”: 160-200 AMPS; 28-32 Volts: 98 Ar/2 O2 .045”: 180-220 AMPS; 30-34 Volts; 75 Ar/25 CO2 Short Arc: .035”: 100-140 AMPS, 22-25…

…H Other elements each Other elements total BAL 2.5-3.5 2.4-3.2 0.15-2.5 14.0-16.0 0.4 0.11-0.17 0.05 0.05 0.015 0.10 0.40 Note: Single values are maximum unless otherwise noted. View/Download Data Sheet…

…coils. 4″, 8″ & 12″. Custom sizes and reels also available. Available in powder and paste form. Tensile Strength psi 60,000. (tested on Standard 1020 Steel) View/ Download Data Sheet…

…(Castings) Yield Strength: 700 MPa (Castings) Elongation: <1 % (Castings) Hardness: 36-45 HRC Co Cr W C Others BAL 27-32 4-6 0.9-1.4 Fe, Si, Ni, Mo, Mn View/Download Data Sheet…

…sizes and forms. Welding Parameters: Spray transfer: .035”: 160-200 AMPS; 28-32 Volts: 98 Ar/2 O2 .045”: 180-220 AMPS; 30-34 Volts; 75 Ar/25 CO2 Short Arc: .035”: 100-140 AMPS, 22-25 Volts,…

BAg-1 is a brazing filler metal that is free-flowing with higher fluidity. This alloy can be used on most iron, copper and nickel-based alloys. Due to its narrow melting range…

…and seawater solutions. Properties: Hardness: 51-60 HRC Density: ~8.7 g/cm3 Melting Range: ~1190 – 1345°C Chemical Composition (Wt%): Co Cr W C Mn Si Ni Mo Fe BAL 26.0-33.0 11.0-14.0…