…rods. Typical Chemical Composition (Wt%): C Mn Si Cr Ni Mo Cu Cb P N S 0.012 7.03 0.44 21.0 16.50 3.15 0.068 0.005 0.014 0.186 0.007 View/Download Data Sheet…

…is less sensitive to the heating rate and therefore should not separate into low/high melting constituents. Ag: 50% | Cd: 18% | Zn: 16.5% | Cu: 15.5% View/Download Data Sheet…

Parameters: Diameter: 1/8” 5/32” 3/16” 1/4″ Current: DCRP DCRP DCRP DCRP Amperage: 125-140 140-160 175-200 200-250 Characteristics: Hardness as deposited: 45-50 Work Hardened: 60-62 Deposit Layers: Multiple Description: Weldite A…

Parameters: Diameter: 1/8” 5/32” 3/16” 1/4″ Current: DCRP DCRP DCRP DCRP Amperage: 125-140 140-160 175-200 200-250 Characteristics: Deposit Layers: Multiple Hardness as deposited: 15-20 Work Hardened: 45-50 Tensile Strength: 144,000…

…and in spools. Chemical Composition: Si + Fe Mn Cu Al Zn Other impurity Other element 0.95 0.05 0.05-0.20 99 min 0.10 0.05 0.15 Note: Single values are maximum unless…

…Chemical Composition (Wt%): Fe O C N H Ti Mo Ni 0.15 0.08-0.16 0.03 0.015 0.008 REM 0.2-0.4 0.60-0.90 Note: Single values are maximum unless otherwise noted. View/Download Data Sheet…

DOWNLOAD BROCHURE…

…He ; 7% Ar ; 3% CO2 Arc SAW: Flux Chemical Composition (Wt%): Si Mn Cu Mo S Ni Cr P C Nb+Ta 0.15 1.5-2.0 3.0-4.0 2.0-3.0 0.02 32.0-36.0 19.0-21.0…

…Chemical Composition (Wt%): Fe O C N H Ti Al V 0.20 0.03-0.11 0.03 0.012 0.005 REM 5.5-6.5 3.5-4.5 Note: Single values are maximum unless otherwise noted. View/Download Data Sheet…

…(Wt%): Si Mn Cu Mo S Ni Cr P C 0.50 1.0-2.5 1.2-2.0 4.2-5.2 0.03 24.0-36.0 19.5-21.5 0.02 0.025 Note: Single values are maximum unless otherwise noted. View/Download Data Sheet…