…(Wt%): Si Mn Cu Mo S Ni Cr P C 0.5 0.60 0.75 0.75 0.03 0.60 12.0-14.0 0.03 0.25-0.40 Note: Single values are maximum unless otherwise noted. View/Download Data Sheet…

…spools. Chemical Composition: Si Fe Mn Cu Mg Zn Al Cr Ti Be Other each Other total 0.25 0.40 0.50-1.0 0.10 2.4-3.0 0.25 REM 0.05-0.20 0.05-0.20 0.0003 0.05 0.15 Note:…

Parameters: Diameter: 5/32” 3/16” 1/4” Amperage: 80-130 130-165 150-180 Characteristics: (KHN) Microhardness vanadium carbides: 2400-2650 Microhardness tungsten carbides: 2350-2750 Microhardness chrome carbides: 1300-1700 Description: Weld V-Tung has deposits that contain…

…Fe O C N H Cr Zr BAL 3.0-4.0 0.04-0.08 7.5-8.5 3.5-4.5 0.3 0.12 0.05 0.03 0.02 5.5-6.5 3.5-4.5 Note: Single values are maximum unless otherwise noted. View/Download Data Sheet…

Parameters: Diameter: .045” 1/16” 7/64” Current: DCRP DCRP DCRP Amperage: 145-195 150-275 350-450 Voltage: 18-24 25-28 26-30 Wire Extension: 1/2”-3/4” 1”-1 ¼” 1 ½”-2” Characteristics: Hardness as deposited: 15-22 Hardness…

…Mn Cu Mg Zn Al Ga Va Other each 0.006 0.006 0.002 0.006 0.006 0.006 99.99 min 0.005 0.005 0.002 Note: Single values are maximum unless otherwise noted. View/Download Data…

…in bar, sheet, strip, and wire. Chemical Composition (Wt%): Ti Al V Fe O C Sn H Cr N BAL 2.5-3.5 14.0-16.0 0.25 0.13 0.05 2.5-3.5 0.02 2.5-3.5 0.05 Note:…

Parameters: Diameter: .045” 1/16” 7/64” Current: DCRP DCRP DCRP Amperage: 145-195 150-275 175-500 Voltage: 18-24 25-28 28-32 Wire Extension: 1/2”-3/4” 3/4”-1 ¼” 1“-1 ½” Characteristics: Hardness as deposited: 18-23 Hardness…

…Chemical Composition (Wt%): Ti Al V Fe O C Mo H Y N BAL 7.35-8.35 0.75-1.25 0.3 0.12 0.08 0.75-1.25 0.010 0.005 0.05 Note: Single values are maximum unless otherwise…

Parameters: Diameter: 1/8” 5/32” 3/16” 1/4” Amperage: 125-140 145-180 180-240 250-300 Characteristics: Hardness as deposited on carbon steel: 53-57 Hardness as deposited on manganese: 50-53 As work-hardened:59-61 Description: Weldite 35…