Specifications:
AWS A5.4
AWS Class E410NiMo-16
ASME SFA 5.4
UNS W41016
Description:
WT E410NiMo-16 is primarily made to weld castings and wrought material of similar composition. These metals were made to contain more nickel to get rid of ferrite in the microstructure. WT E410NiMo-16 is also often used to overlay mild and low alloy steels. Interpass temperature greater than 300°F is required for this alloy. Also PWHT should not be greater than 1150°F as this could result in hardening. This alloy is often used in the production of turbines, offshore and power generation.
Tensile Strength: 110,000 psi min.
Elongation: 15% min.
Available in multiple sizes and diameters. Available in -16 coating.
Chemical Composition (Wt%):
Note: Single values are maximum unless otherwise noted.
Si Mn Cu Mo S Ni Cr P C
0.9 1.0 0.75 0.4-0.7 0.03 4.0-5.0 11.0-12.5 0.04 0.06
