Deloro™ 50 is a hardfacing alloy that is excellent corrosion, wear-resistance, abrasion. It is used in the spray and powder weld processes. It has a low crack sensitivity and should be considered when mild impact is involved, which is achieved due to its loss of abrasion resistance. Deloro™ 50 is machinable and produces dense, hard corrosion resistant coatings.

Hardness: 48-55 HRC
Density: 8.16g/cm3
Melting Range: 980-1,060°C

                                                                                 Chemical Composition (Wt%):

Note: Single values are maximum unless otherwise noted.

View/Download Data Sheet