AWS A5.4
AWS Class E410NiMo-16
UNS W41016

WT E410NiMo-16 is primarily made to weld castings and wrought material of similar composition. These metals were made to contain more nickel to get rid of ferrite in the microstructure. WT E410NiMo-16 is also often used to overlay mild and low alloy steels. Interpass temperature greater than 300°F is required for this alloy. Also PWHT should not be greater than 1150°F as this could result in hardening. This alloy is often used in the production of turbines, offshore and power generation.

Tensile Strength: 110,000 psi min.
Elongation: 15% min.

Available in multiple sizes and diameters. Available in -16 coating.

                                                                                 Chemical Composition (Wt%):

Note: Single values are maximum unless otherwise noted.

View/Download Data Sheet

WT 410NiMo-16 stainless steel electrode data sheet