BAg-1a is a brazing filler metal that is free-flowing with higher fluidity. This alloy can be used on most iron, copper and nickel-based alloys. Due to its narrow melting range…
BAg-1a is a brazing filler metal that is free-flowing with higher fluidity. This alloy can be used on most iron, copper and nickel-based alloys. Due to its narrow melting range…
…Chemical Composition (Wt%): Fe O C N H Ti Al V 0.22 0.12-0.20 0.05 0.03 0.015 BAL 5.50-6.75 3.5-4.5 Note: Single values are maximum unless otherwise noted. View/Download Data Sheet…
…(Wt%): Si Mn Cu Mo S Ni Cr P C 1.0 1.0-2.5 0.75 0.75 0.03 33.0-37.0 14.0-17.0 0.04 0.18-0.25 Note: Single values are maximum unless otherwise noted. View/Download Data Sheet…
…42% Available in multiple sizes and diameters Chemical Composition (Wt%): Si Mn Cu Mo S Ni Cr P C N 0.4 1.6 0.90 3.8 0.01 32.2 28.5 0.018 0.02 0.06…
…37%) Tensile: 292 ksi; Yield: 238 ksi; Elongation: 4.1% (Cold Worked 50%) Tensile: 263 ksi; Yield: 314 ksi; Elongation: 3.3% Chemical Composition (Wt%): Co Ni Cr W Fe Mn Si…
…coatings. Hardness: 48-55 HRC Density: 8.16g/cm3 Melting Range: 980-1,060°C Chemical Composition (Wt%): SiFeCrBCNi 4.0 3.0 10.5 2.0 0.45 BAL Note: Single values are maximum unless otherwise noted. View/Download Data Sheet…
Alloy BAg-2 is a cadmium bearing Silver bra zing alloy, with superior brazing abilities to non-Cad alloys. Good for joining and bridging gaps were poor fit-up is common. Typical uses…
…Tensile Strength: 101,500 psi Elongation: 36% Chemical Composition (Wt%): Si Mn Cu Mo S Ni Cr P C N V 0.90 4.0-7.0 0.75 1.5-3.0 0.03 9.5-12.0 20.5-24.0 0.03 0.05 0.10-0.30…
…Nb + Ta 1.0 0.90 0.75 0.50 0.03 0.60 10.5-13.5 0.04 0.08 (10 x C) min – 0.75 max Note: Single values are maximum unless otherwise noted. View/Download Data Sheet…
…and spool. Chemical Composition (Wt%): Fe O C N H Ti Pd 0.08 0.03-0.10 0.03 0.012 0.005 REM 0.12-0.25 Note: Single values are maximum unless otherwise noted. View/Download Data Sheet…